Skip to content

Contracts

With the add-on module Contracts, your contracts with vendors, landlords and service providers are in fineelik: term, notice, amounts and documents in one place. Upload a contract as a PDF, the AI reads the key details, and you check them next to the document.

Open Contracts in the navigation. The list follows the company in the header.

  • Search by title, number or partner.
  • Filter by status, contract type, vendor, responsible person, tag and Notice by. Reset filters clears all filters.
  • Sort by number, title, end or Notice by.
  • Below the status you see what reading needs: Being read, To check or Reading failed.
  • Flags in the list: Approval in progress and Conditions not approved (a running contract whose matching conditions are not approved). Notice by shows the next termination deadline.
  • ELO marks contracts that are managed in ELO. If there are any, you can also filter by Managed in (fineelik or ELO).
  • From invoices marks an agreement that was created from a suggestion and has no contract document.

A click on the row opens the contract. Search, filters and sorting are part of the address, so a shared link shows the same view.

At the top, Contracts, Deadlines, Missing invoices and Suggestions switch between this list, the deadline overview, the missing invoices and the suggestions from invoices.

Click Add contract. The dialog offers two ways.

  1. Click Choose PDF files or drag the files onto the area. Several files at once also work, each at most 20 MB.
  2. For each file you see what happens: Draft created, being read, Already exists or an error with its reason.
  3. Open contract takes you to the draft.

Each file becomes its own draft. The same file in the same company does not create a second contract; fineelik then shows Already exists with the link. A contract that has been read counts against the quota like a document, see Modules.

  1. Choose the company if you have several.
  2. Enter the Title. Contract type, Vendor and Partner as in the contract are optional.
  3. Click Create draft. fineelik opens the contract page, where you add the rest.

The document is on the left, the details on the right. At the top of the contract page you see how far reading is:

Note Meaning
Being read The AI is reading the contract. The page updates by itself.
To check Fields or tags from the AI are not confirmed yet. The note says how many.
Reading failed The reason is shown, for example a used-up AI quota. Read again starts a new run.
Not read The contract was created by hand and has a document. Have it read starts reading.

Every field the AI has set shows the AI confidence in percent. Fields recognised with uncertainty are marked yellow or red. Default means the value does not come from the contract, for example the title taken from the file name.

  • Source shows the passage in the contract the value comes from.
  • Confirm takes over the value as checked. You confirm the number and unit of a period together.
  • Confirm all confirms all open fields after a question.
  • If you change a value and save, it also counts as checked.

If the AI finds contradictions, they are listed together under notes from reading, for example an end before the start. Go to field jumps to the matching place. If a contract is very long, the AI reads the beginning and the end; the note then says how much from the middle is missing.

The AI never overwrites a value you have set or confirmed, not even with Read again.

Section Content
General Title, contract type, risk, contract number, partner’s number, vendor, partner as in the contract, responsible persons, department, description and the summary by the AI
Term and renewal Start, end, signed on, term, duration, renewal
Termination Notice period, termination takes effect at, notice period as worded, kind of deadline, next notice deadline, earliest contract end, special termination
Deadlines and reminders Calculated dates with calendar file, reminders, termination and termination letter
Invoices Expected and actual amount per payment and period with status, missing invoices and the assigned invoices
Summary AI summary with sources (with the AI assistance module)
Questions about the contract Questions to the AI with answer and source, below them the previous questions (with the AI assistance module)
Amounts Currency, total value, net or gross, matching with invoices, the index clause from the contract, the payments and their price steps
Tags Assigned tags and suggestions from the AI
Confidentiality Switch Confidential and named persons
Documents All documents with their role

fineelik assigns the contract number per company. Save takes over your changes, Discard resets them. If you leave the page with unsaved changes, fineelik asks. You delete a draft with Delete draft after a question.

In the section Amounts the payments of the contract are a table: Description, Cycle, Amount, Kind (fixed or variable), From, To and Object number. You need several lines if a contract has several parts, for example per vehicle. Add payment adds a line.

Does a contract have no payments, for example a framework agreement, tick Contract without payments. This replaces the payment when submitting for approval.

Below each payment is its own tolerance above and below, in percent and as a maximum amount; empty means the contract’s tolerance applies. The box Matching with invoices above holds the contract’s tolerance (empty means the company default), Approve invoices automatically and At most above the previous period.

At most above the previous period is an additional condition for automatic approval: if an invoice is more than this percentage above the invoice of the previous period, fineelik does not approve it automatically, even within the tolerance. Empty means no limit. If an invoice is above the previous period, the box Contract on the invoice always says so in a sentence.

For a variable payment (such as consumption or service charges) the amount is a guide value. fineelik only checks it if the payment has an amount above 0 and a tolerance of its own; the contract’s tolerance does not apply to variable payments. If either is missing, the payment says that the amount is not checked and there is no automatic approval.

If the amount of a payment changes from a given date, for example through a price schedule or an index adjustment, add a price step. The price steps are in the section Amounts below the payments, per payment with Valid from, amount, origin (Price schedule, Index adjustment, Manual or From invoice), note and who added it when.

  1. Click Add price step at the payment.
  2. Enter Valid from and the Amount per period, choose the Origin and add a note if needed.
  3. Click Add.

A step applies from the first period that starts on or after the date; a step in the middle of a period therefore applies from the next one. Change and Remove are available as long as no automatic approval relies on the step. Otherwise the step says so, and for a new price you add a later step. A new step may also not start before the end of the last automatically approved period. Price steps are saved immediately and belong to the matching conditions: after every change these must be approved again, and until then fineelik does not approve any invoice of the contract automatically. They cannot be changed during an approval.

The matching conditions are the details that invoices for this contract are measured against: vendor and partner as in the contract, start and end, currency, net or gross, the payments (amount, cycle, fixed or variable, from, until, object number) and Contract without payments. A second person approves them through the approval module with its rules, steps, deputies and the app. Approval belongs to the Contracts module; you do not need the Approval module for it.

The matching conditions also include the tolerances of the contract and of the payments, Approve invoices automatically, At most above the previous period and the price steps. If you change one of them, the matching conditions must be approved again.

You see the state at the top of the contract page in the section Approval of the matching conditions:

Note Meaning
Not approved yet The contract has never been approved.
Approval in progress Since when, in which step and with whom. Until the decision the matching conditions cannot be changed.
Approved The matching conditions are approved in this version, with the date.
Rejected Who rejected, when and with which reason.
Changed and not approved The matching conditions were changed after the approval. The section shows the changes since the approval.
  1. Save your changes first. The saved version is submitted.
  2. If something is missing, it is listed under Still missing before submitting: title, vendor or partner as in the contract, responsible person, start, at least one payment or Contract without payments. If the AI is still reading the contract, wait until it is done. Confirm values read by the AI in the matching conditions first. A click on an item jumps to the field.
  3. Click Submit for approval. A draft is then In approval.

If no step of the approval rule applies, the matching conditions are approved at once. An approved draft is Approved and from the start Active. Without a start, or if the start has passed, it is active at once.

Whoever submits does not approve, as long as the four-eyes principle is switched on for the company.

  • Withdraw ends a running approval after a confirmation. The open tasks end, the matching conditions can be changed again.
  • If it is rejected, the reason is shown on the contract. A draft becomes a draft again. Correct the details and submit again.

If you change the matching conditions of an approved or active contract, its status stays. The matching conditions count as not approved until a new approval is done. The section shows the changes in a table (Approved, New). Click Submit change for approval. If the change is rejected, it stays visible as not approved until you correct it and submit again.

During an approval the other details can still be changed, for example description, termination and tags. The AI does not read the contract again during this time.

Approvers must be able to see a confidential contract. If people who cannot see the contract would be involved, fineelik does not submit and says how many they are. Whoever manages contracts also sees the names. Add these people under Named persons and submit again. fineelik never grants access by itself.

The Contracts module includes a number of running contracts. How many are included and which add-on packs exist is set out in your contract with eelik or in the price list.

  • Counted are incoming contracts from In approval to Being terminated, so also Approved, Signed and Active. All sources count the same: uploaded and manually created contracts, agreements from suggestions without a document and contracts from ELO.
  • Not counted: Draft, In negotiation, Terminated and Ended.
  • The count covers the whole instance, across all companies.

The current figure is shown at the top of the list of contracts, for example “18 of 20 running contracts”, with a bar. From 80 percent it becomes a notice. Whoever may see the licence also finds the figure under Settings, Licence and usage on the Contracts card. If the number is unlimited, the list shows no figure.

When the quota is reached:

  • Uploading, reading by the AI and creating continue to work. New contracts are created as Draft; a notice when creating and under Suggestions says so too.
  • Submit for approval is blocked; the reason with the current figure is shown right next to the button.
  • Existing contracts, invoice matching and automatic approval continue unchanged. Submit change for approval on a running contract works, because it already takes up a place.
  • When a contract ends or its termination takes effect, a place becomes free again. More contracts come with an add-on pack: whoever may see the licence gets there via Show license, everyone else contacts their administration.
  • If two people submit for the last free place at the same time, only one submission goes through. The other person sees a message with the current figure.

Contracts from ELO are always handed over by ELO, even above the quota. A contract from ELO takes up a place as soon as its matching conditions are submitted or approved in fineelik, and frees it when it is terminated (effective) or ended in ELO. When the quota is reached, its matching conditions cannot be submitted. It then shows the open point Contract quota reached, and fineelik does not approve its invoices automatically.

With the Contracts module, fineelik assigns incoming invoices to the right contract by itself after reading and checks them against it. The result is shown on the invoice in the box Contract, see Check an invoice.

fineelik searches in this order, the first reliable hit wins:

  1. The contract number or the partner’s number is on the invoice.
  2. A remembered reference is on the invoice, such as customer number, contract account, object or vehicle number. For leasing with several vehicles the assignment applies per line item.
  3. Vendor, amount, cycle and service period fit a payment.

A number only assigns by itself if invoice and contract have the same vendor. If several contracts fit, the vendor is missing on one side or the score is not high enough, fineelik only makes a Suggestion. If you assign an invoice manually, fineelik remembers its contract number and contract account and, if you wish, further references for the next invoice.

Every assignment is checked:

  • amount against the expected amount of the period, net or gross as in the contract, with the tolerance above and below
  • currency of the invoice against the currency of the contract
  • service before the start, after the end or after a termination took effect
  • a second invoice for the same period
  • usage against the total value of the contract

Per direction the tolerance of the payment applies, otherwise that of the contract, otherwise the company default. If both percent and maximum amount are set, the smaller amount applies. The result is OK, Deviation or Not checked, and the reasons are shown as a sentence on the invoice, for example “4.2 % above the contract amount (EUR 1,042.00 instead of EUR 1,000.00), 3 % is allowed.”

You set per company what happens on a deviation:

  • Clarify: The invoice goes to the normal approval despite the deviation. The people responsible for the contract get the notice Invoice deviates from contract, the approver sees the deviation as a sentence.
  • Block: The invoice review can only be completed once someone has confirmed the deviation.

If the new amount is right, for example after a price increase, adopt it on the invoice with Adopt as price adjustment as a new price step of the contract, see Check an invoice. After that the matching conditions must be approved again.

If Approve invoices automatically is on for the company and on the contract, fineelik approves an invoice without an approval step when everything holds:

  • The contract is active, its matching conditions are approved and unchanged since.
  • Invoice and contract have the same vendor, the invoice is assigned completely and without deviation.
  • The gross amount is not above the company’s Maximum amount (gross).
  • The invoice is not further above the previous period than At most above the previous period allows, and a variable payment has a guide value and a tolerance of its own.
  • No fixed block applies: first invoice from the vendor, different or recently changed bank details, suspected duplicate invoice, open errors on the document, credit note, other currency than in the contract, second invoice in the same period, invoice marked for clarification, unconfirmed deviation from the quantity or order match.

With the Sample, every nth matching invoice per contract still goes to the normal approval. If the invoice or the contract changes between matching and approval, fineelik does not approve automatically. Every automatic approval is recorded in the invoice history; otherwise the box Contract names the reasons against it. The approval rules also offer the condition Contract match, see Approval.

The section Invoices on the contract page lists, per payment, each period with Expected, Actual, the number of invoices, the day by which the invoice should be there, and the status. Below the period are its invoices with link, amount and deviation. At the top is the total, with a total value also the usage in percent, and a sentence saying since when fineelik monitors the contract and how many days after the end of a period an invoice counts as missing (Grace period for missing invoices in the settings).

Status Meaning
Open The period is still running or the grace period is not over.
Fulfilled An invoice is assigned and matches the contract.
Missing No invoice is assigned after the grace period.
Deviation An assigned invoice deviates from the contract.
Not monitored The period is before monitoring started.

The last 12 periods are shown, Show older periods shows the earlier ones. Invoices for the whole contract, without a period or outside the periods shown are listed below under Other assigned invoices. A missing period shows its finding with Dismiss and, once dismissed, Reopen, see Missing invoices below.

In the section Deadlines and reminders of the contract page, fineelik calculates the dates from term, extension and notice period. They apply to the saved state.

Date Meaning
Terminate no later than Last day the termination must be received to take effect at the possible contract end.
Possible contract end End if terminated by the deadline.
Without termination extended until End if nobody terminates by the deadline.
End of the current term Shown when it differs from the possible contract end.
End of the first term (minimum term) End of the first term once the contract has renewed.
Special termination, declared today: earliest Earliest end with the special termination period.
Termination effective on After a recorded termination: the day it takes effect. The other dates then no longer apply.

Below, one sentence says how fineelik calculated, for example “Notice period of 3 months before the end of the current term”. If a date falls on a weekend, this is noted; the date is not moved. If details are missing, Still missing for the calculation: lists them, and a click jumps to the field. If the termination deadline of an automatically renewing contract passes without termination, fineelik calculates the next term the following day. ELO manages the dates of a contract from ELO; fineelik only shows them.

Calendar file next to a date or reminder downloads the deadline as a file for your calendar, for example Outlook. The entry is all-day and contains the type, number and title of the contract.

Every new contract gets the reminders of its contract type; without own settings 8 and 2 weeks before the termination deadline and 4 weeks before the contract end. You add your own reminder like this:

  1. Click Add reminder.
  2. Choose Before or after a date of the contract with Reference date, Lead time, Unit and Before or after, or On a fixed date with Date and Text.
  3. Add Additional recipients if needed. The responsible persons of the contract receive every reminder.
  4. Click Add.

On the day of the reminder the recipients get a notice and an email. Acknowledge records who completed it and when. If a due reminder is not acknowledged after 7 days, or the date is less than 3 days away, fineelik reports it to the deputy and to the contract administration; this is shown on the reminder. You change reminders that are not acknowledged with Edit. Delete is available for your own reminders created by hand; change defaults of the contract type instead of deleting them.

  1. On an active contract, click Record termination.
  2. Enter Termination received on and choose the Type: Termination, Acceptance of a termination or Cancellation by agreement. fineelik suggests Effective on from term and notice period. If the termination was received after the termination deadline, the dialog says that it only takes effect at the next date.
  3. Click Next, check the details and click Record termination.

The status of the contract is then Being terminated, extensions no longer apply, and on the effective date it is Terminated. If the effective date has already been reached, it is terminated immediately. Until then, Withdraw termination cancels the termination after a confirmation; dates and reminders are recalculated.

For an active contract or a contract in termination, Create termination letter creates a letter to the contract partner. The letter comes from a fixed template, without AI, on the letterhead of the company.

  1. In the section Deadlines and reminders, click Create termination letter.
  2. On the left are the details, filled in from the company data, the vendor and the deadlines: Language of the letter (German, English, Bosnian, Croatian, Slovenian), Recipient, Address of the recipient, Terminate as of, Subject, Text, Place and Name below the signature. fineelik suggests Terminate as of from the deadlines; empty means “at the next possible date”. If the termination deadline has already passed, the dialog says so. Changing the language fills in the subject and text again.
  3. The preview is embedded on the right. After a change, Update preview brings it up to date.
  4. Download saves the PDF, File with contract stores it with the contract as a document with the role Termination. If exactly this letter is already there, fineelik does not file it again and says so.

The letter is a draft: check it, sign it and send it yourself. File with contract does not record the termination; do that with Record termination once the termination has been received. Anyone who manages contracts may create termination letters.

With the AI assistance module, the contract page has two more sections. Both are marked as AI suggestion and do not change anything in the contract.

What the AI reads: the recognised text of the PDF documents of the contract with the role Main contract, Amendment and Other. It does not read termination letters, the fields of the contract page or your notes. If a contract is very long, part of the middle is missing as when reading; the note says how much.

Who uses them: anyone who sees the contract in full. A confidential contract is therefore only summarised by the responsible persons and the named persons. Every request counts towards the AI quota; if it is used up, the reason is shown as text.

  1. In the section Summary, click Create summary. If the contract has no PDF yet, a note appears instead of the button.
  2. The AI reads the contract. This can take a few minutes; the page stays usable in the meantime.

The summary shows a short version, Key points, Your obligations, Obligations of the contract partner and Risks. Each risk has a kind (for example Automatic renewal or Long notice period) and a weight: High risk, Medium risk or Low risk. Above it you see who created it, when and in which language.

  • Show source opens the quote from the contract below each statement, with the document and approximate page. Show in document opens the document on the left and jumps to the page. The page number comes from the AI and has not been checked.
  • Quotes that are not word for word in the contract are left out; a note says how many.
  • If the documents of the contract change, it is marked Outdated. Create again summarises the contract again and replaces the previous summary.
  1. Type your question in the field Your question (3 to 500 characters).
  2. Press Enter or click Ask. Shift and Enter starts a new line.

The answer appears at the top under Previous questions, with the source as in the summary. If the documents say nothing about the question, the AI answers The contract does not say anything about this. instead of guessing. If it finds no matching passage for an answer, Answer without support in the contract is shown: then check against the document. Below each question you see who asked it and when; new questions are at the top.

Under Contracts, Deadlines you find the upcoming deadlines and reminders of all contracts you may see. The overview follows the company in the header.

  • List: Choose the Period (Next 30 days, Next 90 days or Next 12 months). At the top, Overdue shows reminders that are not acknowledged, below are the dates per day.
  • Calendar: one month with the dates per day. The arrow keys change the day, Page Up and Page Down the month, Enter shows the dates of the day. On a phone you see a list per day instead of the grid.
  • Filters: Type of deadline, Responsible and Only mine (contracts you are responsible for).

A click on a date opens the contract. On the start page, the tile Next deadlines shows the dates of the next 30 days, what is overdue and the next date.

Every day fineelik checks whether an invoice is assigned for the periods of active contracts and contracts in termination. Monitoring starts once the contract is active or its first invoice is assigned; fineelik reports nothing for the time before. Daily payments are not monitored per period. If no invoice is there after the grace period, a finding is created and the people responsible for the contract get the notice Contract invoice missing, see Notifications.

Under Contracts, Missing invoices you find the findings of the company in the header with Contract, Payment, Period, Expected, Due since and Status. If all companies are selected, choose one at the top.

  • If the invoice arrives later and is assigned, the finding is Resolved. If the assignment goes away later, for example because it is released, it is Open again.
  • Dismiss needs a reason, for example “came as a collective invoice”. The finding stays with reason, person and date and does not come back by itself.
  • Reopen makes a dismissed finding open again.

The filter Open, Dismissed, Resolved or All switches the list. Confidential contracts are only listed for those who see them in full.

If you regularly receive invoices from a vendor for which there is no contract, fineelik suggests an agreement from them. A suggestion appears when a vendor has sent at least three invoices at regular intervals (monthly, quarterly, half-yearly or yearly) with a similar amount. fineelik recalculates daily; Recalculate now calculates immediately, next to it is Last calculated on.

Under Contracts, Suggestions each suggestion shows the vendor with Cycle, Typical amount (net), Range, Suggested tolerance, Confidence (as a word and in percent), Period and the number of Invoices. Show documents lists the invoices of the series with a link; the documents are only visible to people who may view invoices.

  1. Click Create agreement.
  2. The dialog says what is created: a draft contract without a document with one payment at the typical amount and the suggested tolerance. It follows the normal path with approval of the matching conditions, and earlier invoices are not assigned to it.
  3. Click Create draft. fineelik opens the draft.

The left side then shows No document with Add document instead of the document, and the header shows the flag From invoices. Reject with an optional reason removes a suggestion; it does not come back for this series. With the filter you also see Adopted, Rejected and Outdated (the series was no longer recognised, for example because a contract covers it).

Tags help to find and filter. Under Assign tag choose a tag of the company and click Assign. Changes apply immediately.

When reading, the AI suggests tags. They are under Suggestions from the AI: Accept assigns the tag, Reject declines it, and the AI does not suggest it again. A new tag can be accepted by whoever manages contracts.

With Confidential, only the two responsible persons and the Named persons see content and documents. The switch applies after saving, named persons apply immediately.

Whoever manages contracts but is not named sees only Confidential contract in the list, with number, status and responsible persons. A click opens access management, not the content. This also applies to administrators. Everyone else does not see the contract at all.

The document is on the left; with several documents as tabs with their role. Add document uploads a PDF of up to 20 MB with its role: Main contract, Amendment, Termination or Other. As long as the contract is a draft, a document can be removed again.

If fineelik recognises a contract in the document intake, or you change the document type of a document to Contract, fineelik creates a contract draft from it and has it read. The document is then under Done with Created as contract and a link to the contract.

If fineelik is connected to ELO (see fineelik with ELO) and a contract is managed in ELO Contract, ELO hands it over to fineelik. ELO stays leading. The contract page then shows This contract is managed in ELO. at the top with the status in ELO and the last state from ELO, and in the list the contract carries the mark ELO.

  • From ELO, read only here: title, contract type, risk, partner number, partner as in the contract, department, description, term and extension, termination, currency, total value and, for each payment, description, cycle, amount, from and to. These fields carry the mark ELO with a lock. Change them in ELO and fineelik takes over the new state.
  • In fineelik: the vendor (through the partner mapping), Amounts are net or gross, the tolerances, Approve invoices automatically, for each payment Kind (fixed or variable), Object number, tolerance and Price steps, At most above the previous period, plus tags, confidentiality and responsible persons. If ELO changes the amount of a payment, its price steps stay; the conditions must then be approved again. A payment removed in ELO gets no more price steps and counts neither in expected and actual nor for missing invoices.
  • ELO creates payments and removes them there. A payment removed in ELO stays under the payments with Removed in ELO, because invoices may refer to it. It counts neither in matching nor in the conditions.
  • Status, termination and deleting exist only in ELO. That is why Record termination is missing, while Create termination letter stays. Documents from ELO stay on the contract, and you can add your own documents.

If someone changes a detail from ELO anyway (for example from an older window), fineelik refuses to save and names the affected fields.

fineelik maps the contract partner from ELO to a vendor itself: by vendor number, VAT ID, IBAN or name. If no vendor or several vendors match, fineelik does not guess. The partner then waits under Settings, Contracts, card Partners from ELO.

  1. Open the card Partners from ELO. Open shows the partners without a vendor with the reason (No vendor matches or Several vendors match), Mapped shows the others.
  2. Click the partner. The dialog shows VAT ID, tax number, vendor number and IBAN from ELO.
  3. Choose the Vendor in fineelik and click Map.

The mapping applies to all contracts of this partner, including future ones from ELO. The vendor is part of the matching conditions: the affected contracts must be approved again afterwards. fineelik then matches the open invoices of the vendor again. Remove mapping takes the vendor away again. Anyone who may manage contracts can map partners.

What a contract from ELO still lacks is listed at the top of the contract page as open points, each with the way to fix it:

Open point What to do
Partner not mapped to a vendor Map partner
Contract type from ELO unknown create the contract type in the settings, until then the contract counts as a general contract
Matching conditions not approved Go to approval: submit the conditions for approval
Payment without an amount or without a known cycle Go to payments, then complete it in ELO
Contract quota reached book an add-on pack or wait until a running contract ends, then submit the conditions

fineelik only approves invoices of a contract from ELO automatically if the contract is active in ELO and its matching conditions are approved in fineelik. The other rules of the automatic approval apply here as well. If the conditions change in ELO, for example an amount, the approval no longer applies and a running approval is withdrawn. The responsible persons get the notice Contract conditions changed in ELO. Only after the new approval does fineelik approve automatically again. If the same state comes from ELO again, nothing changes.

Reminders for contracts from ELO come from ELO. fineelik does not send its own, so that nobody is reminded twice. The dates in the section Deadlines and reminders stay visible.

Under Settings, Contracts you maintain per company:

  • Invoice matching: Tolerance (default) above and below in percent and with a maximum amount, On deviation (Clarify or Block), Approve invoices automatically with Maximum amount (gross) and Sample, the Grace period for missing invoices and the list of Fixed blocks that cannot be switched off.
  • Contract types: The predefined types (for example lease contract, leasing, maintenance) can be deactivated but not renamed. You create your own types with Add contract type. Inactive types are missing from the selection but stay on existing contracts. The dialog of a contract type contains the Reminders for new contracts: lead time, unit, before or after and reference date per reminder, plus Add reminder and Restore standard. The column Reminders shows how many there are.
  • Tags: add, rename and delete. New tags suggested by the AI are listed as AI suggestion, not confirmed and only apply after Confirm.
  • Partners from ELO: map the contract partners of the contracts from ELO to a vendor, see Contracts from ELO above.

Only people who can manage the settings, that is the Administrator role, can change Invoice matching, as with the Approval rules. The values apply to all contracts of the company without their own tolerance, including automatic approval. Accountants see them read only, with the note Read only: these values apply to all contracts of the company. Only people who can manage the settings (Administrator role) can change them. fineelik records every change with the old and new value in the log.

Role Contracts
Administrator, Accountant view, add, edit, maintain price steps, submit for approval, maintain and acknowledge reminders, dismiss findings, record termination, create termination letters, adopt, reject and recalculate suggestions, adopt as price adjustment, maintain contract types, tags and access, map partners from ELO
Approver view, approve or reject the matching conditions, acknowledge own reminders
Viewer view, acknowledge own reminders

Only the Administrator changes Invoice matching under Settings, Contracts. Accountants see it read only.

Any role that sees the contract in full can use the summary and questions about the contract if the AI assistance module is booked.