Skip to content

fineelik app

With the fineelik app you see your open approvals on your phone, on iPhone and Android. You sign in once, as in fineelik in the browser. You approve, reject and ask questions directly in the app, and you scan receipts and capture expenses there too.

Use the bottom bar to switch between Approvals, Capture, Receipts and Account. The app shows the areas available to you. The number next to Approvals counts pending approvals and bank files you can approve. It excludes your own submissions waiting for others and questions addressed to you. If there is nothing under Approvals, the app starts on Capture.

The bar follows iPhone and Android conventions and light or dark mode. On iOS 26 it uses the system glass appearance. Labels stay visible; screen readers also announce the full approval count.

  1. Install the fineelik app and open it.
  2. On Connect your instance, enter the short name or full address in Instance address, for example mycompany or mycompany.fineelik.com, and tap Continue. Or tap Scan QR code: fineelik shows the code in the browser in the user menu under fineelik app, although until the app is in the stores only if a phone is already connected to your account.
  3. Tap Sign in. The phone’s browser opens with the usual sign-in: password and second factor or Microsoft.
  4. The page Connect the fineelik app shows the name of your phone and your account. Tap Connect. The app takes over and shows your approvals.

At the bottom of Connect your instance you find No fineelik yet?. View demo opens a demo with sample data, no sign-in needed: tap Open demo there. fineelik resets whatever you change in the demo every night. More about fineelik opens this help.

Before you sign in, the app uses your phone’s language. On Connect your instance you choose another one under Language; the phone remembers it. Once signed in, you change it under Account at Language; it then applies to you in fineelik, also in the browser.

Under Approvals you see up to three sections: Questions for you, Bank files to approve (only if you may approve bank files) and To decide. Tap an item to open it. Pull the list down to refresh it.

  • Details shows the amount, vendor or employee, due date, under What for the first lines with G/L account and cost center, plus the review notes and the full accounting.
  • Document shows the invoice or the receipt image directly in the app. Zoom with two fingers; a double tap zooms into an image. The button at the top right shows the document full screen, without header and buttons; the cross closes it again.
  • Approve asks once more; a comment is optional.
  • Reject needs a reason. The item goes back for correction with it.
  • Ask sends a question to the person who submitted the item. You can still decide before the answer arrives.

The same rules apply as in the browser: another person approves your own item, you only see items of your companies, and every decision is recorded in the history of the item.

If someone asked you a question about an item, it is listed under Questions for you. Tap it, write your answer and tap Send answer.

A second person approves a created bank file (four-eyes principle). Open it under Bank files to approve, check the items and tap Approve file. Whoever created the file sees a note instead. The confirmation in online banking (TAN) still applies.

Tap Capture at the bottom in the middle.

  • Scan receipt opens the document scanner of the phone. It finds the edges and straightens the image. Several pages become one PDF.
  • Choose photo takes photos from your library and straightens the receipt like the scanner. On the iPhone this happens automatically; if the app finds no receipt in the photo, it stays as it is. On Android the scanner opens: tap the gallery icon there, it detects the edges and you can still adjust them. Choose file takes a PDF or image from your files.

Then the app asks Who paid? Tapping Receipt captured shows the captured receipt full screen, for example to compare it with the details read. If you go back before the receipt is sent, the app asks first: Keep editing or Discard; only discarding deletes the receipt from the phone.

  • Paid by the company (or invoice to the company): the receipt goes to document intake. If you have several companies, choose one; the app remembers your choice. While fineelik reads the receipt, the app shows the receipt, below it fineelik is reading the receipt with the current step (Checking the document, Reading the text, Reading amounts and taxes, Matching the vendor, Suggesting the coding) and the fields Amount, Date, Vendor and Coding. Each detail found lights up where it is printed on the receipt and flies into its field; the coding shows the account of the largest line. fineelik reads amount, date and vendor ahead, right after recognizing the text: they usually appear within seconds, and the full reading may still correct them afterwards. At the end it says Finished reading, followed by the status and the review notes. The fields are only shown to people who may read invoices. If your device reduces animations, the details appear without the flight. If reading takes longer, the app says so and the details appear later. At the bottom the app says that fineelik keeps reading in the background, so you can close the app. Next receipt takes you to the next capture, Done to My receipts.
  • Paid privately (expenses): the app creates an expense receipt for you (see below).

The question is skipped if you only have one of the two ways. Receipts go to the company if you may upload invoices; expenses are captured by people who may capture expenses and are linked to an employee.

Send receipts from other apps (mail, files, WhatsApp, photos, banking app) straight to fineelik: tap Share in the other app and choose fineelik (on the iPhone the entry is called fineelik App). PDFs and images work, up to 20 files at once (on the iPhone up to 10); each file becomes its own receipt.

  • One file: the app opens the same flow as after a photo, with the question Who paid?, the company and the result.
  • Several files: the app shows Shared receipts. Paid by the company sends all of them to document intake together. With Paid privately (expenses) you capture one receipt after the other, because each needs its own details. Use the cross to discard a file that is not a receipt.

If the app is locked or not signed in, unlock or sign in first; the shared files wait on the phone until then. Anything not yet captured is shown under Capture with Show shared receipts. Files that are not a PDF or image or are larger than 20 MB are not taken over, and the app says so.

First the AI reads the receipt. Meanwhile the app shows what it is reading: Reading the text, Reading merchant and date, Reading amount and VAT rates, Checking currency and tip, Suggesting the expense type. Then the form appears with receipt date, amount, merchant, tax, receipt number and a suggested Expense type; you check it and choose the Payment method. The expense type comes from your earlier receipts from the same merchant, otherwise from other receipts in the company; if there are none, the AI picks a suitable one (with the AI assistance module). If reading takes longer than usual, Fill in yourself lets you start right away; the AI then only fills fields you have not filled in yet. Please check the values; fields the AI read with low certainty carry Please check.

Under VAT rates you see the gross amounts per VAT rate of the receipt, with net and VAT below. A non-taxable deposit or voucher is a line at 0 % with a minus amount, for example -0.25. Add line adds a rate; if the lines do not add up to the amount, a notice appears below.

If the receipt is in another currency, choose it under Currency next to the amount. fineelik suggests the rate, from the card statement or as the ECB reference rate on the receipt date, depending on the company setting; you can change it. Below it you see what is reimbursed in the company currency. The VAT rates are then left out, as foreign VAT is not input tax. With a tip, the amount is what you paid. Payment method is set to Private; change it for the company card, for example.

  • Save as draft creates the receipt without submitting it.
  • Submit asks once more and then sends the receipt for approval.

Without a connection the AI does not read; you can then enter the details yourself.

Under Receipts you see:

  • Not sent yet: receipts waiting on the phone. Without a connection the receipt stays there and is sent automatically as soon as there is a connection again. If the app is closed by then, it sends the receipt the next time you open it. Send again tries right away.
  • To the company: what you sent to document intake, with the status from fineelik.
  • Expenses: your expense receipts, including those captured in the browser. You can Edit and Submit a draft. A rejected receipt shows the reason and, once corrected, goes back for approval with Submit again.

The app deletes sent receipts from the phone. When you sign out, it also deletes those not sent yet and names them first.

Under Capture you find the section Trips if you may capture trips and are linked to an employee.

  • Capture trip (Austria): the same four steps as in the browser, Where and when, Days and nights, Receipts and Review, also for trips abroad. From two characters in the Place field, fineelik suggests places, addresses and companies right below it; once you pick one, fineelik takes over the country and enters kilometres and driving time from the route. Without a suggestion the place stays as text. You pick date and time from the calendar and clock of your device, with Today and Yesterday as shortcuts. Days before the previous time are blocked; a time before it is moved to the earliest possible one. Under Receipts, Add receipt photographs hotel, train or parking straight onto the trip. The Payout according to preview is shown at the bottom, Save draft saves your progress, and after the review comes Submit.
  • Request travel order (Federation of BiH): destination, country, purpose, start and end, means of transport, lodging and advance. The request goes for approval. Once approved, open it under Receipts and tap Settle: actual departure and return, meals, costs and trip report. The preview shows payout or repayment, Settle and submit sends the settlement for approval.

If Capture trip is missing, your instance still runs an older version of fineelik; the button appears after the update.

Push notifications to the phone are prepared, but sending is not switched on yet. Until then no notification reaches the phone, even if you have already chosen Turn on push under Account. You see new tasks under Approvals and by email as usual, see Notifications.

Once sending is switched on:

  • Under Account, Turn on push sends notifications to this phone; the phone asks once for permission. In approvals the app also asks once by itself, Not now leaves the phone alone.
  • You get new tasks, reminders, questions, answers and decisions, plus review questions from accounting to you. Which ones exactly is set in the browser under Notifications with Push to phone.
  • The notification only names the kind (for example “New approval”), never vendor, amount or names. Tapping opens the item, for a review question Review questions; if the app is locked, after unlocking.
  • If the phone does not allow notifications, Open settings takes you there. Turn off push ends notifications on this phone.

When you open it and after more than one minute in the background, the app asks for Face ID, fingerprint or your phone’s PIN. Without a screen lock on the phone the app stays locked. Scanning a receipt and choosing photos or files do not count as background, even if it takes longer.

Case Result
You open the app at least every 30 days stays signed in
30 days without use or 180 days after connecting sign in again
Password changed, second factor reset, account disabled signed out immediately

In fineelik in the browser, open the user menu and there fineelik app. Under Connected devices you see every phone with its last use. Sign out ends the access of that phone immediately, for example when it was lost. In the app itself you sign out under Account with Sign out.

The app fetches new versions by itself, without you tapping anything: when it starts, it waits briefly for a new version and starts with it right away, and when you come back to the app after at least ten minutes, it checks again. If a form is open, such as a review, a receipt or a trip, it only downloads the new version and uses it on a later return when Approvals, Receipts or Capture is open, or at the next start of the app. Unsaved entries are not lost. At the bottom of Account you see the version and its state, for example built-in code or update with an id and date. Check for update fetches a new version right away. Once one is loaded, Update loaded: restart now restarts the app with it. Larger changes need a new version of the app. If the check fails, the reason appears below: the error code, whether updates are active, the runtime version and channel, and the latest messages. You can select this text and copy it for support.

Under Account, Connections lists the instance, name and email address for each connection. Connect another instance opens address selection and the usual sign-in. Existing connections remain signed in. Tap a connection to open it; Currently open identifies the active connection.

Documents and pending uploads stay with their connection. An upload already running finishes its current step on the original instance; further steps resume when you reopen that connection. Assign newly shared documents explicitly to the displayed instance with Use this instance.

Notifications currently do not identify their instance. If several connections are saved, opening a notification first asks you to choose the connection, then opens the item. Sign out ends only the connection currently open. The device lock continues to protect the entire app.

Under Account, open Absence and deputy. Set absence lets you choose the start, end and another active person as your deputy. Until, inclusive covers the entire last day in your phone’s time zone. Tap Save absence to apply the settings. Use Change absence to update an existing entry or End absence to end it early.

During this period, your deputy can see and decide your personally assigned approvals within their permissions and company access. Delegated tasks say Deputy for {name}, including inside the task and while viewing its document. Screen readers also announce the person being covered.

This section is available when your instance offers internal invoice, expense or travel approvals. You can still end an existing absence if those approvals are turned off.

Open a sent document with View document. Invoice and documents displays the original; Related documents lists its associated files. The details show the header, line items, accounting and review notes. Your own uploads retain their submission timeline in the status view. Your read permission and company access apply.

Without invoice read permission you can still view the original you uploaded, while you retain access to its company. Other invoice data and documents remain protected. Your instance must support this feature; otherwise the app explains that an update is required.

When information is missing, reviewers with invoice read and edit permissions can Send question under Details. The invoice must still be awaiting review. The question goes to the person fineelik suggests: whoever uploaded the document or sent it by email, otherwise the recognised orderer. You choose a different person in the browser. If there is no suggestion, you can only send the question in the browser.

Under Account, Review questions, View questions, choose To me or, with invoice read permission, From me. Filter by Open, Answered or All. Only the addressed person can answer once, even without invoice read permission. Existing questions can still be answered after review is complete. Questions and answers remain with the invoice. Questions from an approval remain in that approval.

Review questions require a current instance. Older instances retain their existing workflow.

For an invoice In review, Review invoice opens the editor. With editing permission you can correct the header and printed supplier details, bank accounts, supplier and subsupplier, lines, accounting, taxes, payment terms and order references. Supplier selection requires permission to read suppliers; accounting lists require permission to read master data. The company stays the same here. If fineelik does not know the supplier yet, create it there with Create supplier: name, VAT ID, address and bank details are already filled in, and Create and assign assigns it right away. With ERPNext the button is called Create in ERPNext and assign, and the supplier is created there. You need permission to maintain suppliers for this.

Editing starts with Checks: it lists every open item, such as review notes, a missing supplier, lines without accounting or an amount not yet coded. Tapping an item opens the matching place. Next to Review invoice you see how many items are open, and a bar at the top of the editor shows how much is left to code. Supplier, subsupplier, payment method and every accounting field are pick lists as in the browser: the field shows code and name, a tap opens the list with a search (Search code or label), No selection clears a field. Suggestions from rules and AI have a dashed border and show the confidence in percent; tapping the percentage explains origin and reason, the arrow next to it resets changed accounting to the suggestion. Fields read from the document under Header also show the recognition confidence, and Checked after a change or confirmation. A field read with low certainty has a yellow border there and Confirm right below it. Lines are cards with a short summary that open with a tap; Add line collapses the others.

A field read with low certainty opens its own check step: the document at the top, the field below. If the value is right, tap Confirm, otherwise correct it there; the next uncertain field follows, Later skips it. Show document keeps the document in view while you edit the other details. Possible duplicates, formal e-invoice errors and order or delivery discrepancies require a separate confirmation. Unsaved changes are shown in the bar at the bottom; Discard undoes them after asking. The disk icon (Save changes) saves your entries. The button next to it reads Save and complete when there are changes, otherwise Complete review; it saves first and then asks for confirmation. If completion is blocked, for example without a supplier, the reason appears above the buttons. If accounting conflicts with a learned rule, explicitly choose whether it applies only to this invoice or changes the rule for future invoices. Completing the review requires completion permission.

Yes/no accounting fields, such as Check withholding tax with ERPNext, are switches. The names of the fields from the system templates appear in the language of the app. If something is missing after reading, such as the fiscal number, Reprocess under Checks reads the document again. Manual changes to the invoice are lost, so the app asks first. Afterwards it shows the invoice while fineelik reads it again. In a Bosnian company the bank field is called Account number or IBAN: it shows the account number, which you change directly, and below it the matching IBAN. You type an IBAN from another country into the same field.

If the invoice has changed in the meantime, your entries remain visible. Reload invoice asks before discarding unsaved entries. Background updates do not overwrite your entries.

Under Receipts, Invoices opens a separate list of invoices you may read for your companies. Your own submissions remain separate. Search finds suppliers, invoice numbers, amounts and line item content. Filter by processing status and, where multiple companies are available, by Company. More results load as you scroll.

Tap an invoice to view its document. If there are no matches, choose Reset search and filters. After a loading error, your search and filters are preserved; retrying loads the same selection again.