Using AI correctly
fineelik uses artificial intelligence (AI) to read invoices and make suggestions for the coding. This page explains what the AI does, where it can be wrong and how you can tell in the interface.
With this page, eelik supports you with AI literacy under section 6.6 of the contract terms and Art. 4 of the AI Act (Regulation (EU) 2024/1689). Everyone who reviews, approves or posts results from fineelik should read it.
The most important sentence
Section titled “The most important sentence”Everything the AI delivers is only a suggestion. It can be incomplete or wrong. People make the decision: you review the invoice, people with approval rights approve it, and a second person approves a bank file.
The AI itself approves nothing and triggers no payment.
Where does fineelik use AI?
Section titled “Where does fineelik use AI?”| Task | What the AI does | Where you see it |
|---|---|---|
| Reading an invoice | reads vendor, number, date, amounts and line items from the PDF | header data and line items in the review screen |
| Suggesting coding | suggests G/L account, cost center and cost object for lines without coding | cells marked “Suggestion” |
| Combining line items | combines many small line items into a few posting lines | grouped lines, “Split” brings back the individual lines |
| Tidying up rules | suggests cleaning up duplicate or unused coding rules | Settings, Posting rules, only with your consent |
The AI also helps in these places, and the results there are suggestions too:
- The pre-check decides whether a document is an invoice or, for example, a delivery note.
- The AI reads custom fields from the document.
- With the Document file module, it also reads delivery notes and other documents.
- For combined line items, it writes a description on request.
- For the column mapping of lists, it makes suggestions.
Not everything in fineelik is AI. Many suggestions come from rules that fineelik has learned from your earlier reviews, and from similar postings. They are suggestions too.
How fineelik shows uncertain fields
Section titled “How fineelik shows uncertain fields”For the header data (vendor, number, date, amounts):
- Each field that has been read carries a small certainty in percent. The value shows how sure fineelik was when reading.
- From about 95 percent the display is green, down to just under 80 percent it is grey. Below 80 percent the field has a yellow or red outline.
- There you find the sentence “Uncertain, please compare with the document” and the Confirm button.
- If you have compared the field and it is correct, click Confirm. If you change the value, the field also counts as checked. After that the tick Checked appears there. This stays saved and also applies to your colleagues.
For the coding (line items):
- Marked as a suggestion, with a dot in the cell, are values from rules that are not yet confirmed, from the default coding of a vendor, from similar postings and from the AI. fineelik enters values from confirmed rules without a marking.
- The certainty in percent is shown for suggestions where fineelik knows it. A click on it shows origin and reasoning: from a learned rule, from similar postings or from the AI.
- Suggestions are only made for empty fields. fineelik does not overwrite what you have entered yourself.
Invoices with suggestions always go through your review. They are not passed on automatically.
Only an invoice for which everything fits runs without review:
- The rules have coded it completely, without a suggestion.
- The vendor is reliably recognised, and so are all the core fields that were read (at least 80 percent).
- The amounts are right, and the invoice date is there.
- The invoice is addressed to your company.
- There is no suspicion of a duplicate and there are no open mandatory fields.
It then goes straight to approval. Otherwise it lands with you in the review. You control this on the Automation card under Settings, Posting rules. Whoever may manage companies can change it.
Notes above the line items point out inconsistencies, for example when totals do not add up, a date is missing or a vendor has been matched with uncertainty. A click jumps to the place concerned.
What accounting has to check
Section titled “What accounting has to check”Go through these points for every invoice. For invoices without marked fields a few seconds are enough, for marked ones take your time.
- Vendor: Is it the right one? Do the name and, if present, the VAT ID match?
- Invoice number and date: Do they match the document?
- Amounts: Do net, tax and gross fit together, and is the currency right?
- Tax rates: Does the rate fit the service? For foreign invoices: is the treatment right (for example reverse charge)?
- Coding: Is the suggested account right for this service? Especially for new vendors, unusual line items and high amounts.
- Bank details: Does the IBAN match what you know from the vendor? A changed IBAN has to be approved by a second person.
- Duplicates: Is it the same invoice that is already there?
Invoices where the AI is wrong more often: poor scans, photos, unusual layouts, handwritten additions, till receipts with many line items, invoices in a foreign currency and documents with several tax rates.
Correcting and letting it learn
Section titled “Correcting and letting it learn”- The suggestion is right: complete the review, the suggestion is then confirmed.
- The suggestion is wrong: choose a different value. Your decision replaces the suggestion.
- Back to the suggestion: “Reset to suggestion” on the cell. For values from rules this also works after saving. You only get back a suggestion from the AI or from similar postings as long as you have not yet saved the change.
- fineelik learns from your confirmed coding and turns it into rules for later invoices from the same vendor. A rule that no longer fits can be corrected or paused by you under Settings, Posting rules.
- The AI only suggests changes to rules. Nothing is deleted without your consent. Accepted suggestions can be undone under “Accepted”, as long as the rules have not been changed since.
What happens to your documents
Section titled “What happens to your documents”For reading, fineelik sends text and image of the document to the configured AI provider. Scanned documents go to text recognition as an image. Which provider it is, you can see in the settings under “AI and text recognition”. With fineelik AI, the processing takes place with providers in the EU. fineelik reads e-invoices directly from the file, so nothing goes to the AI for them.
Alternatively, your administration can store its own key and choose the provider itself. Some providers, for example OpenAI and Anthropic, then process outside the EU. Which services see your data and where they are located is in the settings under “Privacy” (more under Privacy) and in the list of sub-processors on fineelik.com.
In the 14-day trial, processing stops as soon as the documents of the trial are used up. In a booked plan it keeps running, and extra documents are charged (more under Modules). With your own key there is no limit from fineelik. Waiting documents carry on by themselves as soon as the licence allows it again. If your company has processed a great many documents in the month, fineelik no longer suggests with AI by itself, only from similar postings. You then ask the AI with a click on Accounting suggestions. Reviewing and approving invoices is always possible.
For administrators: AI literacy in the team
Section titled “For administrators: AI literacy in the team”Under section 6.6 of the contract terms, you take appropriate measures so that the people who review, approve or post results build AI literacy. In particular, they should know that AI results are suggestions and how fineelik marks uncertain fields. You do not have to guarantee a specific level for any individual person. This page explains exactly that. Here is how you put it into practice:
- Give new staff in accounting and approval the link to this page before they start work.
- Go through the checklist above in the team, for example in a short briefing.
- Record who was briefed and when. This is your proof.
- You find the AI settings under Settings, “AI and text recognition”. You see the usage of the month under “Licence and usage”.